PHASE 05 ยท FIRMWARE
Firmware.
Small, safe and ready for the field.
You arrive with a board, a prototype or a development kit. You leave with tested, documented firmware on Arm Cortex-M or RISC-V, or on an MCS-51 (8051) for small control tasks, built to be maintained and, where the hardware allows, updated safely in the field.
At a glance.
- A board, prototype or development kit
- Requirements or a feature list
- An existing code base
- Or firmware that needs a review
- Firmware architecture
- Drivers, RTOS and communication stacks
- Secure boot and OTA update
- Static analysis and tests
- Source code in your repository
- Release builds and bootloader
- Test results and CI setup
- Release notes and documentation
What is included.
Ten building blocks. Take them all, or just the ones you need.
- Firmware architecture
- Bare metal or RTOS
- Drivers, HAL & BSP
- Communication stacks
- Secure boot & bootloader
- OTA firmware update
- Low-power management
- MISRA C & static analysis
- Unit & integration tests, CI
- Code review & release
EU CYBER RESILIENCE ACT
Ready for the Cyber Resilience Act.
The EU Cyber Resilience Act (Regulation (EU) 2024/2847) sets cybersecurity requirements for products with digital elements. Its vulnerability and incident reporting obligations apply from 11 September 2026; the essential requirements and CE marking under the Act apply from 11 December 2027. Firmware decides most of it, so I build it in from the start.
- Secure updates Signed firmware images, secure boot and an update path that can be maintained in the field.
- Vulnerability management A documented way to receive, assess and fix vulnerabilities over the support period.
- SBOM A software bill of materials for every release, generated in the build.
- Secure by default No default passwords, minimal open interfaces, protected keys and debug ports.
Whether and how these rules apply depends on your product. This is engineering support, not legal advice.
HOW INTEGRATION IS CHECKED
Integration and continuous integration.
Every change is built, tested and run on real hardware automatically, so incompatibilities between hardware revisions, firmware and software show up as they evolve, long before a release.
What you get.
Git repository, documentedBinaries + version historySecure boot, OTA updateUnit and integration testsMISRA C findingsBuild, flash, debugAgreed in your proposal
A board, prototype or development kit
Working firmware
After your approval
Where to next.
Continue with me through the next phases to start of production, or leave with what you came for.
CONTACT
Ready to start at phase 05?
Or hand over the complete development? Just ask.
A new product to develop from scratch, a design that needs a second look, or a prototype that does not work yet: a few lines are enough to start.
- A personal reply within one working day
- No cost and no commitment up front: you only pay for work you approve
- Your idea stays confidential, NDA on request (how I keep your project confidential)
Write to me
info@siliconmeetscode.comHelpful to mention: what the product does, where it is today, and your timeline. The email opens with these questions ready to fill in.
Working from Belgium and Germany with clients across Europe and Asia